D-Link AC3200 Ultra User Manual page 43

Section 4 - Configuration - Router Mode
MAC Address The default MAC address is set to the Internet port's physical interface
Clone:
MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
VLAN: For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 45.
Click Save when you are done.
Static IP
IP Address: Enter the IP address provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Primary DNS
Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the Internet port's physical interface
Clone:
MAC address on the router. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
VLAN: For more information on enabling the VLAN feature, refer to VLAN
Bridging on page 45.
Click Save when you are done.
D-Link DIR-890L User Manual
PPPoE (continued)
⌵
Address Mode: Dynamic IP
Service Name:
Primary DNS Server:
Secondary DNS Server:
⌵
MTU: Auto
Mac Address Clone: << MAC Address
VLAN: Disabled
COPYRIGHT © 2016 D-Link
⌵
Address Mode: Static IP
IP Address:
Service Name:
Primary DNS Server:
Secondary DNS Server:
⌵
MTU: Auto
Mac Address Clone: << MAC Address
Disabled
VLAN:
COPYRIGHT © 2016 D-Link
⌵
⌵
38