System Remote_Management Https Configure; System Remote_Management Telnet Configure - D-Link DWC-2000 Cli Reference Manual

4.11 system remote_management https configure

S.No Command Name
1 save
2 exit
3 cancel
4 enable
5 type
6 from_address
7 end_address
8 port
9 enable_remote_snmp Enable/disable remote snmp.

4.12 system remote_management telnet configure

Command
S.No
Name
1 save
2 exit
3 cancel
4 enable
5 type
6 from_address Set the starting IP range, and
configured servers.
Description
Save access Management
changes for https.
Save access Management
changes for https and exit
current mode.
Roll back Remote Mgmt
changes.
Enable/disable remote mgmt
over https.
Enable/disable remote mgmt
over https.
Set the starting IP in case of
range, and the IP to be allowed
access in case of granting
access to a particular machine
Set the Ending IP in case of
range.
Set the port you want to use for
HTTP.
Description
Save access Management
changes for telnet.
Save access Management
changes for telnet and exit
current mode.
Roll back changes to Remote
Mgmt.
Enable/disable Remote mgmt
over telnet.
The kind of access you want to
allow.
Type and Description
Boolean choice
Unsigned integer
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-
255
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-
255
Unsigned integer
Boolean choice
Type and Description
Boolean choice
Unsigned integer
62