Net Routing Static Ipv6 Configure <Name - D-Link DWC-2000 Cli Reference Manual

6 subnet_mask
7 gateway_address
8 interface
9 metric
10 private_flag
11 active_flag
7.24 net routing static ipv6 configure <name>
S.No Command Name
1 <name>
2 save
3 exit
4 cancel
5 destination_address
6 prefix
7 gateway_address
Sets the subnet for this rule.
Sets the gateway IP.
Sets the interface for which
the rule applies.
Sets the metric for this route.
Defines whether the route
can be shared with other
gateways when RIP is
enabled.
Defines whether it's an active
route.
Description Type and Description
Adds new
IPV6 static
String.
routes.
Saves IPV6
static route
changes.
Saves IPV6
static route
changes and
exits current
mode.
Rolls back
IPV6 route
configuration
changes.
Sets the IPV6 IP address
destination IP. abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd
where each part is in the range [0-9A-Fa-f:]
Sets the prefix
length for this
Unsigned integer.
rule.
Sets the
102
0-255
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
IP address AAA.BBB.CCC.DDD
where each part is in the range
0-255
OPTION interface type.
Unsigned integer.
Boolean choice.
Boolean choice.