Event Status - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

Configuration
7.9.7

Event status

54
Siemens AG
Î
You can toggle the entire list On and Off by highlighting Notification and
pressing the button. You can toggle the individual items On and Off by
highlighting that item and pressing the
4. Highlight OK and press the
NOTE
Mail notify is the only option available for the System event.
NOTE
For the Notify action to work, the DVR should be registered in the RAS (Remote Administration
System).
Î You can save your System Event changes by highlighting Save and pressing
the button.
Î Selecting Cancel exits the screen without saving the changes.
Highlight Event Status in the Event menu and press the
Event Status screen.
Fig. 48 Event Status screen
The Event Status screen displays the status of the DVR's systems and inputs.
Events will be highlighted, and related channels or events will flicker for five seconds
when detected.
Alarm-In, Motion, Video Loss, Video Blind and Text-In will be highlighted when
each event is detected based on the settings you made in the Alarm-In, Motion
Detection and Text-In setup screen on the Event menu.
Panic Record will be highlighted while the DVR is in the panic recording mode.
Check Alarm-In and Check Recording will be highlighted when each event is
detected based on the settings you made in the System Event setup screen on the
Event menu.
button.
button to accept your changes.
button to display the
06.2010