Table of Contents
Advertisement
Configuration
42
Siemens AG
Fig. 36
Motion Detection Actions screen
The DVR can be set to react to motion detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector,
sound the DVR's internal buzzer, notify a number of different devices, and/or move
PTZ cameras to preset positions.
NOTE
You can associate multiple cameras with a camera that detects motion.
1.
Highlight the box under the Record heading and press the
Î
A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the DVR
detects motion on the selected camera, it starts recording video from all the
associated cameras.
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
2.
Highlight the box under the Alarm-Out heading and press the
3.
Select between Alarm Output and Beep (DVR's internal buzzer) that you would
like to activate and to sound whenever the DVR detects motion on the selected
camera's input.
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
4.
Highlight the box under Notify heading and press the
You can toggle the entire list On and Off by highlighting Notification and
pressing the
button. You can toggle the individual items On and Off by
highlighting that item and pressing the
5.
Highlight OK and press the
button.
button to accept your changes.
button.
button.
button.
06.2010
Hide quick links:
Advertisement
Table of Contents
