Connecting The 2In1 Tablet To The Internet; Connecting To A Stationary Wireless Network (Wifi) - Silvercrest ST10432-10d Operating Instructions Manual

13) Connecting the 2in1 Tablet to the Internet

Connecting to a stationary wireless network (WiFi)

a) Call up the settings (see Section 12).
b) In Settings, tap "n
c) In the next screen, tap "w-F
d) Use the tip of your finger to move the slider for WiFi from left to
right. The word "o
searches for all available wireless networks nearby and then
displays them as a list.
e) Tap the network that you wish to connect to.
i
NOTE
If you do not want the tablet to automatically connect to
the selected network if available, remove the check mark
next to "C
f) Now tap "C
selected.
Depending on how your router is configured, you will be prompted
to authenticate yourself to the network. Generally speaking, a wireless
network is secured through a WPA network key or a WPS authentication
method.
WPA
If a WPA network key was assigned for your router, enter it in the
input field and click "n
& i
etwork
" now appears next to the slider. The tablet
n
onneCT auTomaTiCally
". The tablet now connects to the network
onneCt
" to confirm.
ext
".
nternet
" on the left.
i
".
35 GB