Using The Measurement Sheets - Bosch MS 6 Manual

Bosch Motorsport
▪ To assist the discovery of relevant labels, data list may be graduated.
▪ Description and label symbol explain the task of the data label.
▪ Structure of Bosch Motorsport Labels shall communicate recognition values.
CWxxx
CWDAMCAL
CWDAMCAL_FL
dam_xx
dam_fl
udam_xx
DAM_XX_YY
DAM_FL_GRD
8.2

Using the Measurement Sheets

▪ When RaceCon is online, press "F11" key to switch from Design Mode into
Race Mode.
▪ The measurement sheet is extended to full screen.
▪ Switch between different sheets using the tabs at the bottom of the page or
the keyboard shortcuts associated with the sheets.
▪ Press ESC key to return to Design Mode.
Code‐Word starts an action for the
function
Code‐Word damper travel adjustment
"True" sets the actual measure values of
all dampers to 0
Code‐Word damper front left adjust‐
ment,2‐point sensor calibration added
by offset adjustment for each single
damper
measure values are always typed in
small letters
damper position front left
voltage values starts always with "u",
the value represents the sensor signal
Data Label are always typed in big let‐
ters
Gradient for damper travel sensor, front
left, values are available from sensor
manufacturer
ECU MS 6
Online Measurement and Calibration | 8
71 / 78