Harness Connectors; Dummy Plug; Tools And Contacts; Wiring - Bosch MS 6 Manual

Bosch Motorsport

Harness connectors

Bosch automotive connectors are not available as complete set of components,
so Bosch Motorsport itself offers such a package. For more technical details
please check Bosch‐connector homepage, 196 pins
http://www.bosch‐connectors.com/bogscoca/category/142
MS 6 harness connector type A (105
contacts), coding variant 1
MS 6 harness connector type K ( 91
contacts), coding variant 1
Protection Classification
Temperature range
Shakeproofed
Wiring diameter
Pinsize

Dummy Plug

Dummy plug 1 928 405 459 for unused
connections
Dummy plug 1 928 405 460 for unused
connections
Dummy plug 1 928 301 207

Tools and Contacts

Tool Matrix
1928498212 Matrix 1.2
1928498213 Matrix 1.2
1928498837 1928498840

Wiring

Bosch Motorsport recommends using the specified cable material and harness
layout for automotive connectors and wiring applications.
For Ethernet and USB connection CAT5 specified material is recommended and
the pairs and shield connections have to be strictly respected as shown in the
wiring diagram.
For USB, the maximum wiring length is limited to 3 m and it is not allowed to be
included into a common harness and also there is no interruption allowed.
ECU MS 6
F 02U B00 712‐01
F 02U B00 711‐01
IP X6K, X8, X9K
‐40 to 120°C
Max. 3.4 g
0.35 to 2.5 mm²
1.2 mm; 2.8 mm
Matrix 1.2 / CB / 0.75 to 1.0 mm²
Matrix 1.2 / CB / 1.0 – 1.5 mm²
BTL 2.8
Contact Wire size
Clean Body 0.35 to 0.5 mm²
1928.498.991
Clean Body 0.75 to 1.0 mm²
1928.498.992
BTL 2.8 1.5 to 2.5 mm²
1928.498.651
Technical Data | 2
19 / 78