Connecting By The Paired Device List - Kenwood TH-D74A User Manual

Entering the PIN Code
When searching for the device, you may be requested to
enter the PIN code depending on the device to be connected.
When Requested to Enter the PIN Code
The PIN code input screen appears. Refer to the instruction
manual of the device to be connected and enter the PIN
code using the number keys and press [A/B].
If you press [ ] when the PIN code input screen is
displayed, the Bluetooth device information screen appears.
You can confirm the device name, device address, and
device class.
Note:
◆ The PIN code differs depending on the device to be connected.
Refer to the instruction manual of the Bluetooth device and
enter the correct PIN code.
Disconnecting from a Bluetooth Device
You can disconnect a connected Bluetooth device to stop
communication.
1 Access Menu No. 933.
2 Select the device.
• When disconnecting the device that is already selected,
move to step 3. If you press [
information screen appears. If you select the device to
be disconnected and press [
information screen appears. You can confirm the device
name, device address, and device class. Pressing
[MODE] returns to the previous screen.
3 Press [A/B].
The disconnection process begins.
• If 30 seconds or more passes during the disconnection
process, the Bluetooth device disconnection failure
screen appears. Pressing [A/B] returns to the
frequency screen. Perform the procedure again from
step 1.
Note:
◆ When disconnecting from a PC, please make a disconnecting
operation by the PC.

CONNECTING BY THE PAIRED DEVICE LIST

A device that has been paired once is registered to the
device list as a paired device. Select and connect to a device
from the paired device list.
Connecting by the Device List
1 Access Menu No. 931.
The device list screen appears. If there is not even one
device paired, "No device is found" is displayed. Refer
to "Connecting with a Headset (Pairing)" and then pair a
device.
], the Bluetooth device
], the Bluetooth device
18-2
2 Select the device to be connected.
When connecting the device that is already selected,
proceed to step 3.
If you select the device to be connected and press [
the Bluetooth device information screen appears. You can
confirm the device name, device address, and device class
of the device to be connected.
3 Press [ENT].
[Connecting. . .] screen appears.
4 Make the connection operation by the headset.
When the headset is connected, <
display.
• Since the connection operation depends on the
headset, refer to the instruction manual of the headset.
Displaying the Device List Menu Screen
If you select the device to be connected and then press
[MENU], the device list menu screen appears. Select
[Connect].
If you press [ ] from the device list menu screen, the
Bluetooth device information screen appears. You can confirm
the device name, device address, and device class of the
device to be connected. Pressing [MODE] returns to the
previous screen.
Clearing Devices by the Device List
Clear a paired device by the device list.
1 Access Menu No. 931.
The device list screen appears.
2 Press [MENU].
The device list menu screen appears.
],
> appears on the