Callsign Squelch/ Code Squelch; Gps Data Tx Mode - Kenwood TH-D74A User Manual

Note:
◆ This setting is canceled when the power is switched OFF.

CALLSIGN SQUELCH/ CODE SQUELCH

This function is useful when communicating with the specific
stations. The squelch opens and you can call only when the
digital code set by your station or the Callsign of your station
is received.
Callsign Squelch
The squelch opens only when the received destination
Callsign matches that of your station. The squelch does not
open if all 8 digits of the Callsign do not match.
1 Access Menu No. 620.
2 Select [Callsign Squelch] and press [A/B].
When the Callsign squelch is selected, the <
appears on the display.
Code Squelch
The squelch opens only when the received digital code
matches. This can be set for each band.
1 Access Menu No. 620.
2 Select [Code Squelch] and press [A/B].
When the code squelch is selected, the <
appears on the display.
Note:
◆ The code squelch is different from DCS (Digital Coded
Squelch) in FM mode.

GPS DATA TX MODE

This function is to transmit location information using GPS
when operating in DV/DR mode.
1 Access Menu No. 630.
2 Select [Off] or [On].
[Off]: Does not transmit my position location information.
[On]: Transmits my position location information.
GPS Sentence
Select the sentence to transmit location information when
operating in DV mode. The GPS sentences that can be used
with the transceiver are 6 kinds of [GGA], [GLL], [GSA],
[GSV], [RMC], and [VTG], but only four of them can be set at
the same time.
1 Access Menu No. 631.
2 Select [$GPGGA], [$GPGLL], [$GPGSA], [$GPGSV],
[$GPRMC], or [$GPVTG].
[$GPGGA]: Global Positioning System Fix Data.
[$GPGLL]: Geographic position, latitude/ longitude.
[$GPGSA]: GPS DOP and active satellites.
[$GPGSV]: GPS Satellites in view.
[$GPRMC]: Recommended minimum specific GPS/Transit
data.
[$GPVTG]: Track made good and ground speed.
> icon
Note:
◆ When my position is set other than GPS, GSA, GSV, VTG
sentences are not sent.
GPS Auto TX
This function is to transmit the positioned GPS data at regular
intervals. You can set the interval for transmitting. Location
information and other data from the GPS are transmitted at
the set interval.
1 Access Menu No. 632.
> icon
2 Select [Off], [0.2], [0.5], [1], [2], [3], [5], [10], [20], [30], or
[60] minutes.
Note:
◆ Use the GPS Auto TX function in DV mode. Be sure to set to
Off in DR mode.
◆ When my position is set other than GPS, GPS Auto TX function
does not operate.
16-11