1.4 Connection Cables for the Respective Connection
To connect the GOT to a device in the respective connection type, connection cables between the GOT and a device are
necessary.
For cables needed for each connection, refer to each chapter for connection.
1.4.1
GOT connector specifications
The following shows the connector specifications on the GOT side.
Refer to the following table when preparing connection cables by the user.
RS-232 interface
Use the following as the RS-232 interface and the RS-232 communication unit connector on the GOT. For the GOT
side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector specifications
GOT
GT27
GT23
GT15-RS2-9P
GT01-RS4-M
(2) Connector pin arrangement
GT27, GT15-RS2-9P, GT01-RS4-M
GOT main part connector
RS-422/485 interface
Use the following as the RS-422/485 interface and the RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
GT27
GT23
GT15-RS4-9S
GT01-RS4-M
GT15-RS4-TE
(2) Connector pin arrangement
GT27, GT15-RS4-9P, GT01-RS4-M
GOT main part connector
see from the front
5
9
9-pin D-sub (female)
Hardware
Connector type
Version
9-pin D-sub (male)
-
inch screw fixed type
-
9-pin D-sub (male)
inch screw fixed type
-
see from the front
1
5
6
9
9-pin D-sub (male)
Connector type
9-pin D-sub (female)
M2.6 millimeter screw
17LE-13090-27(D2AC)
fixed type
9-pin D-sub (female)
M2.6 millimeter screw
17LE-13090-27(D3AC)
fixed type
-
1
6
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
Connector model
17LE-23090-27(D4C□)
17LE-23090-27(D3CC)
Connector model
DDK Ltd.
DDK Ltd.
-
SL-SMT3.5/10/90F BOX
Manufacturer
DDK Ltd.
DDK Ltd.
Manufacturer
1 - 17
1