Page 2
Indications for Use/Intended Use This symbol indicates the date of manufacture. The Sony LMD-2735MD/2435MD LCD Monitor are intended to provide 2D color video displays of images from surgical endoscopic/laparoscopic camera systems This symbol indicates the equipotential and other compatible medical imaging systems.
Page 3
The portable and mobile RF communications equipment such as cellular phones can affect the LMD-2735MD/ 2435MD. Warning The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the LMD-2735MD/2435MD. Guidance and manufacturer’s declaration-electromagnetic emissions The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below.
Page 4
Guidance and manufacturer’s declaration - electromagnetic immunity The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-2735MD/2435MD should assure that it is used in such as environment. Compliance level Immunity test...
Page 5
Guidance and manufacturer’s declaration - electromagnetic immunity The LMD-2735MD/2435MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-2735MD/2435MD should assure that it is used in such as environment. Immunity test IEC 60601 test level...
Page 6
Recommended separation distances between portable and mobile RF communications equipment and the LMD-2735MD/ 2435MD The LMD-2735MD/2435MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the LMD-2735MD/2435MD can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the LMD-2735MD/2435MD as recommended below, according to the maximum output power of the communications equipment.
Page 7
Consult with Sony qualified personnel for mounting arm/wall mount installation. For the customers in the U.S.A. SONY LIMITED WARRANTY - Please visit http:// www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.
PIP / POP menu ..........21 Input Configuration menu ......22 System Configuration menu ......23 Initial Setup menu ........... 24 Preset menu ............25 Troubleshooting ...........25 Error Messages ..........26 Specifications ..........26 Dimensions ...........31 LMD-2735MD ............31 LMD-2435MD ............31 Table of Contents...
Recommendation to Use more than strain, fatigue, or nausea) while watching video One Unit images. Sony recommends that all viewers take regular breaks while watching video images. The length and As problems can occasionally occur for the monitor, frequency of necessary breaks will vary from person to when the monitor is used for safety control of personnel, person.
The screen and the cabinet become warm during Sony dealer. operation. This is not a malfunction. On Moisture Condensation On a Long Period of Use If the unit is suddenly taken from a cold to a warm...
Do not include the monitor with household waste. About this manual The instructions in this manual are for the following models: LMD-2735MD LMD-2435MD The illustration of LMD-2735MD is used for the explanations. Any differences in specifications are clearly indicated in the text. Features...
Location and Function of Parts and Controls Front Panel Power indicator Turns on or off the assigned function. You can adjust the assigned function by pressing the / buttons. (Refer to When the power is turned on, the power indicator lights in green.
PORT A: Displays the input signal assigned to When the unit switches to the standby state, the power PORT A. When the input signal of PORT A is indicator lights in orange. displayed, a menu which allows you to select the input signal to be assigned to PORT A is displayed.
Connects the supplied AC power cord. For safety, do not connect the connector for peripheral Sony AC-120MD (DC input) connector device wiring that might have excessive voltage to this Connect the DC connector of the separately sold AC port.
Input DVI Rev.1.0 applicable digital signal. Connecting the Power connector Active through output connector of the DVI digital Cord signal. Outputs the signal which inputs to the connector. The signal protected by HDCP is not output. 1) HDCP (High-bandwidth Digital Content Protection) is a To connect the power cord copyright protection technology using encryption technology of digital video signals.
To remove the power cord Initial Setting Switch the unit to the standby state by pressing the side of the switch, then remove the AC power cord. When using the separately sold AC adaptor, switch the unit to the standby state, remove the AC power cord When you turn on the unit for the first time after from the AC adaptor, then remove the DC connector purchasing it, select the area and language where you...
Page 17
Press the or button to select the area where you intend to use the unit and press the button. When the confirmation screen is displayed, press the or button to select Yes and press the CONTROL button.
Using the Menu The unit is equipped with an on-screen menu for making various adjustments and settings such as picture control, input setting, setting change, etc. To change the menu language, refer to “To change the menu language” on page 17. Press the /...
The selected tab is shown in blue, and setting items Adjustment Using the of the selected tab appear. Menus Select an item. Press the / button to select the item. The item to be changed is displayed in blue. Items Make the setting or adjustment on an item.
Input Name Submenu Setting Power Supply Gamma Select the appropriate gamma mode HDCP Setting from among “1.8, ” “2.0, ” “2.2, ” “2.4, ” Auto Input Select “2.6, ” “DICOM. ” “DICOM” is for reference, not diagnostic, purposes only. System Configuration Phase Adjusts color tones.
Submenu Setting Submenu Setting Sets the ACC (Auto Color Control) Shift V Adjusts the vertical position of the circuit to “On” or “Off. ” picture. A higher setting moves the picture up, and a lower setting moves Sets the CTI (Chroma Transient the picture down when an analog PC Improvement) circuit to “On”...
Input Configuration menu Submenu Setting HDCP Setting Sets the HDCP setting for signals input in the DVI-D connector. Enable: Sets to use the signals protected with HDCP. Disable: Sets to use the signals not protected with HDCP. When “Disable”...
System Configuration menu Submenu Setting Auto: The format and scan mode are displayed for about 3 seconds when the content of Status Display is changed. On: The format and scan mode are always displayed. Off: The format and scan mode are ...
Initial Setup menu Submenu Setting The Initial Setup menu is used to set the default preset Sleep Mode Sets the sleep mode to on or off. When you set to “On, ” the monitor enters into value. power saving mode by turning off the backlight if there is no input signal from the selected connector for more than 1 minute.
Submenu Setting Troubleshooting Custom Button Assigns the function to the CUSTOM 1, CUSTOM 2 or CUSTOM 3 button on the front panel, and can set the following functions to on or off. This section may help you isolate the cause of a problem No Setting ...
Error Messages Specifications When the following messages appear on the screen, turn Picture performance off the power and contact an authorized Sony dealer. LCD panel a-Si TFT Active Matrix Pixel efficiency 99.99% Messages Description Viewing angle (panel specification) Temperature Error The temperature of this unit has 89°/89°/89°/89°...
Page 27
DC 5V output connector Always verify that the unit is operating properly Round type pin (female) (1) before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT General NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE Power AC IN: 100 V - 240 V, 50/60 Hz, 0.6 A -...
Page 28
Available signal formats Analog signal Signal Input connector format VIDEO S-VIDEO HD15 COMPONENT RGB NTSC – – – – 480/59.94i – – 480/60i – – 480/60p – – 576/50i –...
Side Dimensions When an optional stand SU-600MD is attached LMD-2735MD Front When an optional stand SU-600MD is attached Unit: mm (inches) Mass: Approx. 8.7 kg (19 lb 2.9 oz) (when the optional stand is not installed) LMD-2435MD Rear (VESA Mount Instruction)
Page 32
Rear (VESA Mount Instruction) * Length of M4 screws (4) Monitor cabinet Attached object M4 screw ) to 9 ( Side When an optional stand SU-600MD is attached Unit: mm (inches) Mass: Approx. 6.7 kg (14 lb 12 oz) (when the optional stand is not installed) Dimensions...