Job Recall - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Job Recall

You can recall the last three destinations, scan settings, and send settings which
have been set, and then send your documents.
IMPORTANT
• The specified destinations, scan settings, and send settings are stored in memory
when:
- The control panel power switch is pressed
- (Start) is pressed
- (Reset) is pressed
- The Auto Clear mode activates
• The Standard mode is not stored in Recall memory.
NOTE
The three most recent settings stored in memory are not deleted when the power is
turned OFF.
1
2
(SEND) ➞ [Recall].
Press
NOTE
If Restrict Recall in Restrict the Send
Function is set to 'On', [Recall] is not
displayed. (See Chapter 4, "Setting the
Send Function," in the System Settings
Guide.)
Press [1 Before], [2 Before], or [3
Before].
4
4-51

Job Recall