Network Interface Ip Configuration - HP StoreEasy 1000 Administrator's Manual

The VLAN assignments are displayed in the interface pane when you proceed to the Network
Interface IP Configuration step.
NOTE: If you select Do not configure network interface VLAN identifiers now after you
assign VLAN IDs to teams and adapters, the assigned IDs are not removed. You must go through
each VLAN page and select the Do not add a VLAN ID to this team implicitly for all teams and
adapters.

Network Interface IP Configuration

Network Interface enables you to begin the IP address configuration by selecting the interface
on which you want to make changes using the interface pane. Each interface that can be
configured is enabled on the system, even if no changes are made to the interface. The IP
addresses that you assign can be static or dynamically assigned using DHCP.
To configure the IP information for an interface:
1. Select Use DHCP to assign IP address and gateway to dynamically assign an IP address
using DHCP or select Assign a static IP address and gateway to assign a static IP address.
Figure 36
IMPORTANT:
address must also be static and you must also assign a network mask. Assigning a default
gateway address is optional.
2. Select Use DHCP to assign DNS server addresses or Assign a static IP address and
gateway. If you selected the Assign a static IP address and gateway option in the above
step, the Assign a static IP addresses for DNS option is selected by default and you
cannot change it.
60 Managing HPE StoreEasy 1000 Storage
If you select Assign a static IP address and gateway, the DNS server