Yamaha Helm Master Operation Manual page 35

4. When the timer is activated a notification
window will appear approximately 10
minutes prior to the system being pow-
ered down.
■ System Info
This function is to show information on the
Helm Master control system components
mounted on the boat and the software ver-
sion of the Digital Network gauge (6Y9).
Function and operation of components
Tank Set
System Info
■ Trim Assist
This function automatically sets the outboard
motor trim angle according to the engine
speed.
1. From the main menu, select "Trim
Assist".
TIP:
• There are no default trim assist positions
set in a new gauge. The trim assist posi-
tion settings must be made in order for the
trim assist to function.
• Lower the engines to the trim range before
starting. Trim assist will not lower the
engines until shifted into gear.
0
2000
3000
4000
Trim Level
Trim Assist
0 0
0
40
60
80
30