1.26
Weight and Dimensions
Wheel Base:
Working Width:
Cutting Width:
Transport Width:
Overall Length:
Overall Height:
Working Weight:
Recommended Lubricants and Hydraulic Fluids
Grease Points:
Engine:
Hydraulic System:
Ambient Temperature Range
0 - 30̊ C (32 - 86̊ F)
ISO viscosity grade
46 hydraulic oil
Should you be in any doubt please contact your TORO dealer. Using incorrect grades will cause premature wear
of hydraulic components and invalidate warranty.
Cutterhead
Cutting Width:
Cylinder Diameter:
Cylinder Speed:
Height of Cut:
Number of Blades:
Smooth Rear Roller:
Smooth Front Roller:
Grooved Front Roller:
Configuration:
SPECIFICATIONS
1610 mm (63.4˝)
3640 mm (143.3˝)
3460 mm (136.2˝)
1890 mm (74.5˝) at 13mm (1/2˝) height of cut
2930 mm (115˝)
1775 mm (70˝) with R.O.P.S folded
2385 mm (94˝) with R.O.P.S in its vertical operating position
Including 2 post R.O.P.S, 8˝ 6 blade cutterheads and full tank of fuel. It
excludes the operator and any other options.
1870 kg (4123 lb)
A good quality medium grease
Refer to Engine Operators Manual
15 - 40̊ C (59 - 104̊ F)
ISO viscosity grade
68 hydraulic oil
MK3 200 mm Cutterhead
762 mm (30˝)
200 mm (8˝)
1050 rpm approx
12 mm (0.5˝) to 80 mm (3˝)
4, 6, 8, 10
Standard
Optional
Optional
Fixed/Floating
1.26
MK3 254 mm Cutterhead
762 mm (30˝)
254 mm (10˝)
1050 rpm approx
12 mm (0.5˝) to 80 mm (3˝)
4, 6
Standard
-
-
Fixed