Product Overview; Controls - Toro 30410 Operator's Manual

Product Overview

Figure 2
1. Traction pedal
2. Brake pedals
3. Pedal locking latch
4. Tilt steering lever
5. Parking brake latch

Controls

Note: Determine the left and right sides of the
machine from the normal operating position.
This machine produces sound levels in
excess of 85 dBA at the operators ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating
this machine.
Traction Pedal
The traction pedal (Figure 2) controls forward and
reverse operation. Press the top of the pedal to
move forward and the bottom to move backward.
Ground speed depends on how far you press the
6. Charge indicator
7. Engine oil pressure warning
light
8. Engine coolant
temperature warning
light
9. Glow plug indicator light
10. Temperature gauge
pedal. For no load, maximum ground speed, fully
press the pedal while the throttle is in Fast.
To stop, reduce your foot pressure on the traction
pedal and allow it to return to the center position.
Important: The speed limiter screw must
stop the traction pedal before the pump
reaches full stroke or damage to the pump
may occur.
Brake Pedals
Two foot pedals (Figure 2) operate individual
wheel brakes for turning assistance, parking, and
to aid in obtaining better side hill traction. A latch
connects the pedals for parking brake operation
and transport.
Pedal Locking Latch
The pedal locking latch (Figure 2) connects the
pedals together to engage the parking brake.
Tilt Steering Lever
Press the lever (Figure 2) down to tilt the steering
wheel to the desired position. Then release the
lever to lock the adjustment.
Parking Brake Latch
A knob on the left side of the console actuates
the parking brake lock (Figure 2). To engage the
parking brake, connect the pedals with the locking
latch, push down on both pedals, and pull the
parking brake latch out. To release the parking
brake, press both pedals until the parking brake
latch retracts.
Charge Indicator
The charge indicator (Figure 2) illuminates when
the system charging circuit malfunctions.
Engine Oil Pressure Warning Light
The light (Figure 2) illuminates when the engine
oil pressure is dangerously low.
Engine Coolant Temperature Warning
Light
The light (Figure 2) illuminates and the engine
shuts down when coolant reaches an excessively
high temperature.
16