Setup: Calibrating The Touchscreen - Toshiba 4400 Series Installation And Operation Manual

12.16 Setup: Calibrating the Touchscreen

At anytime while using the tabs to view system details, the touchscreen can be calibrated by executing
the built-in calibration routine.
To calibrate the touchscreen:
1.
Press the Setup Tab.
2.
Press the DISP-EX 800 button.
3.
Press the entry Cali (Parameter 8211)
to begin the calibration routine.
4.
Follow the directions on the display to
press the "+" at each location it flashes
on the display. To exit the calibration
routine press QUIT at any time.
See Fig. 12-15 A, B.
5.
After the touchscreen has been recalibrated
the display will indicate that the calibration
routine has passed. Press Quit to return
to the main display. See Fig. 12-15 C.
82
A
B
C
FIGURE 12-15 TOUCHSCREEN DISPLAY
CALIBRATION
4400 Series Installation and Operation Manual – 64527-006