Adjusting The Myride™ Suspension System - Toro 74997 Operator's Manual

Adjusting the MyRide™
Suspension System
The MyRide™ suspension system adjusts to provide a
smooth and comfortable ride. Adjusting the rear 2-shock
assemblies is the easiest and quickest adjustment for changing
the suspension system. Position the suspension system where
you are most comfortable.
Adjusting the Rear-Shock Assemblies
The slots for the rear-shock assemblies have detent positions
for reference. You can position the rear-shock assemblies
anywhere in the slot, not just in the detent positions.
The following graphic shows the position for a soft or firm
ride and the different detent positions
1. Firmest position
2. Softest position
Note: Ensure that the left and right rear-shock assemblies
are always adjusted to the same positions.
(Figure 38).
Figure 38
3. Detents in the slots
Adjust the rear-shock assemblies
A
B
C
D
30
(Figure 39).
Figure 39
g030019