Product Overview; Controls - Toro 74946 Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
Controls
Become familiar with all the controls before you start the
engine and operate the machine
1. PTO switch
2. Throttle switch
3. High oil-temperature
indicator
4. Low oil-pressure indicator
g027333
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4 and Figure
Figure 5
5. Malfunction-indicator light
(MIL)
6. Hour
meter/Safety-interlock
display/Fuel gauge
7. Ignition switch
8. Fuses
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance
1. Fuel gauge (bars)
2. Battery light
3. Hour meter
Fuel Gauge
The fuel gauge is located with the hour meter and the bars
light up when the ignition switch is on
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
5).
Safety-Interlock Indicators
There are symbols on the hour meter that indicate with a
black triangle that the interlock component is in the correct
position (Figure
Battery-Indicator Light
If you turn the ignition key to the O
seconds, the battery voltage displays in the area where the
hours are normally displayed.
The battery light turns on when you turn the ignition on and
when the charge is below the correct operating level
6).
Throttle Control
There are 3 speed positions: Max, Economy, and Low..
14
(Figure
Figure 6
4. Safety-interlock symbols
5. Low-fuel indicator light
(Figure
6).
position for a few
N
6).
6).
(Figure