Sony DVP-FX700 Service Manual page 34

Before Calling Service Personnel (continued)
Symptom
No sound. • The equipment connected with the audio
cable is not set to receive DVD signal
output.
• The audio cables are not connected
securely.
• The power of the equipment connected
with the audio cable is turned off.
• The Digital Audio Output is set to the
wrong position.
The playback
• The disc is dirty.
picture is poor.
• No disc is inserted.
The DVD player does
not start playback.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the guide.
• A menu is on the TV screen.
• The Rating level is set.
Before Calling Service Personnel (continued)
Symptom
The LCD is dark. • Check that Brightness control is set to "–".
No response when • Some discs prohibit certain operations.
buttons are
pressed.
• Hold switch is set to HOLD position.
• The remote control is too far from the
DVD player.
The remote con-
trol does not
• There is an obstacle in the path of the
work properly.
remote control and the DVD player.
• The batteries in the remote control are
exhausted
Cause
65
Cause
66
1-31 E
Correction
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
• Connect the audio cable into the jacks
securely.
• Turn on the equipment connected with
the audio cable.
• Set the Digital Audio Output to the
correct position, then turn on the DVD
player again.
• Clean the disc.
• Insert a disc. (Check that the disc
indicator in the display window is lit.)
• Insert a playable disc. (Check the disc
type, color system and Regional code.)
• Place the disc with the playback side
down.
• Place the disc on the disc tray correct-
ly inside the guide.
• Press the SETUP button to turn off
the menu screen.
• Cancel the Rating function or change
the rating level.
Correction
• Adjust the brightness.
• " " may appear on the screen during
operation.
• Release the hold mode.
• Operate the remote control within about
23 ft (7 m).
• Remove the obstacle.
• Replace the batteries with new ones.