Connecting To An Amplifier Equipped With A Dolby Pro Logic Surround; Connecting To An Amplifier Equipped With A Dts Decoder - Sony DVP-FX700 Service Manual

Connecting to an amplifier equipped with a Dolby Pro Logic Surround

Dolby Pro Logic Surround
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital
decoding.
If your A/V receiver has a Dolby Pro Logic ll/ Pro Logic decoder, refer to the following connection diagram.
You must set the LINE SELECT
switch to the "Out" mode
Right side of unit
IN
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT
To VIDEO
To AUDIO IN/OUT
IN/OUT
Audio/Video cable
(Supplied)
• With a receiver equipped with Dolby Digital
Connect the equipment the same way as
described in "Connecting to an amplifier equipped
with a Dolby Digital decoder" on the previous
page. Refer to that receiver's owner's manual and
set the receiver so you can enjoy Dolby Pro Logic
Surround sound.

Connecting to an amplifier equipped with a DTS decoder

Digital Theater System(DTS)
DTS is high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If
you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video
discs or audio CDs.
You must set the LINE SELECT
switch to the "Out" mode
Right side of unit
IN
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT
To AUDIO IN/OUT
Optical cable (Not supplied)
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTE:
• When you are connecting (via the OPTICAL OUT) an AV decoder that does not have the Dolby Digital, Digital
Theater System (DTS) or MPEG2 decoding, be sure to set Digital Audio Output of this DVD player to "PCM"
from the SETUP menu. Otherwise, high volume sound may damage your hearing as well as the speakers.
Amplifier equipped with a
OUT
DC IN 9.8V
Dolby Pro Logic Surround
S-VIDEO OUT
To analag
audio input
Amplifier equipped with a
OUT
DC IN 9.8V
DTS decoder
S-VIDEO OUT
To digital audio input
(optical)
1-28
Front speaker
(right)
Center
speaker
Front speaker
(left)
(yellow)
No need to connect
when using an S-video cable
to connect to your TV.
NOTE:
• Be sure to set Digital Audio Output of this DVD
player to "PCM" from the SETUP menu when
you enjoy sounds of Dolby Pro Logic
Surround using this connection.
59
Front speaker
(right)
Center
speaker
Front speaker
(left)
60
Rear speaker
(right)
Rear speaker
(left)
Connect one or two rear speak-
ers. The output sound from the
rear speakers will be monaural
even if you connect two rear
speakers.
Sub woofer
Rear speaker
(right surround)
Rear speaker
(left surround)