106-6754
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
107-1866
1. Tipping hazard and sliding or loss of control hazard,
drop-offs—do not turn sharply while traveling fast, instead,
slow down and turn gradually, do not operate the machine
near drop-offs, slopes greater than 15 degrees, or water;
keep a safe distance from drop-offs.
2. Warning—if the roll bar is lowered, do not wear the seat
belt, if the roll bar is raised, wear the seat belt.
3. Warning—do not use split ramps, use a full ramps when
transporting machine, only use ramps with inclines less
than 15 degrees.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
106-9206
1. Wheel torque specifications
2. Read the Operator's Manual.
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
1. Warning–there is no rollover protection when the roll bar is
down.
2. To avoid injury or death from a rollover accident, keep the
roll bar in the raised and locked position and wear the seat
belt. Lower the roll bar only when absolutely necessary; do
not wear the seat belt when the roll bar is down.
3. Read the Operator's Manual; drive slowly and carefully.
12
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
107-3069