Cab Maintenance; Filling The Washer-Fluid Bottle; Cleaning The Cab Air Filters - Toro 31236 Operator's Manual

Cab Maintenance

Filling the Washer-Fluid Bottle

1. Perform the pre-maintenance procedure; refer to
Preparing the Machine for Maintenance (page
2. Open the hood and locate the washer-fluid bottle
(Figure 51).
Figure 51
Washer-Fluid Bottle with Washer-Fluid Symbol
3. Fill the bottle with washer fluid as needed.
4. Close the hood.

Cleaning the Cab Air Filters

Service Interval: Every 250 hours Replace the cab air filters
if they are torn or excessively dirty.
1. Remove the screws and grates from over both the
in-cab and rear cab air filters
32).
(Figure 52).
1
1. Filter
2. Grate
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil-free, compressed
air through them.
Important: If either filter has a hole, tear, or other
damage, replace it.
3. Install the filters and grate, securing them with the
thumb screws.
47
3
Figure 52
3. Screw
1
2
3
Figure 53
3. Screw
2
g028378
2
g028379