Adjusting The Motion-Control Damper; Adjusting The Motion-Control Neutral-Lock Pivot - Toro 74902TE Operator's Manual

Adjusting the Motion-Control
Damper
The top damper mounting bolt can be adjusted to obtain a
more desired motion-control lever resistance. See
for mounting options.
RH Motion Control Shown
1. Torque the locknut to 2.26 N-m (200 in-lb). Bolt must
protrude past end of locknut after torque.
2. Most resistance (firmest feel)
3. Damper
4. Medium resistance (medium feel)
5. Least resistance (softest feel)
Figure 87
Figure 87
Adjusting the Motion-Control
Neutral-Lock Pivot
The flanged nut can be adjusted to obtain a more desired
motion-control lever resistance when moving it to the
neutral-lock position. See
1. Loosen the jam nut.
2. Tighten or loosen the flanged nut to the desired feel.
For more resistance, tighten the flanged nut.
For less resistance, loosen the flanged nut
3. Tighten jam nut.
1. Flanged nut
55
Figure 88 for adjustment options.
Figure 88
2. Jam nut