1. Engine guard
2. Engine air intake screen
3. Bolt
Checking and Cleaning the
Hydraulic Unit Shrouds
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Raise the seat.
4. Clean the debris and grass from the hydraulic unit
shrouds (Figure 75).
5. Lower the seat.
Figure 74
4. Fan housing
5. Screw
1. Hydraulic unit shrouds
47
Figure 75