Recommended Maintenance Schedule - Toro 38700 Service Manual

Recommended Maintenance Schedule

MAINTENANCE SERVICE INTERVAL
After the first 2 hours
After the first 5 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 160 hours
Yearly
Yearly or before storage
Walk-Behind Rotary Broom Service Manual
SPECIFICATIONS & MAINTENANCE
MAINTENANCE PROCEDURE
Check the traction cable.
Check the broom cable.
Check the engine oil.
Check the engine oil level.
Check for loose hardware.
Check the broom shaft shear pin.
Check the tire pressure.
Check the condition of the belts.
Change the engine oil (more frequently in severe conditions).
Lubricate the broom angle lock pin.
Check the spark plug.
Check the traction cable.
Lubricate the hex shaft.
Check the broom cable.
Check the air pressure in the drive tires and inflate them to 116–137 kPa
(17–20 psi).
Drain the gasoline and run the engine to dry out the fuel tank and
the carburetor at the end of the season.
Inspect and replace the traction drive belt, if necessary.
2-5