13. Route the belt around the idler arm pulley (Fig.
1858).
14. Move the idler arm outward to apply tension to
the fan belt. Refer to "Checking the Alternator Belt
Tension" on page 6/4-60. While applying tension,
use a 9/16" socket to tighten the idler arm nut (Fig.
1859).
Toro Wheeled CUL Service Manual
Fig. 1858
DSC-1760a
Fig. 1859
DSC-1763a
4-PAW DIESEL/ENGINE
15. Slide the rear suction hose onto the rear pump
suction fitting (Fig. 1860).
16. Slide the front suction hose onto the front pump
suction fitting (Fig. 1861).
Fig. 1860
DSC-1765a
Fig. 1861
DSC-1767a
6/4-69