Raising the Traction Unit
1. Raise the loader arm 6" – 12" (15 – 30cm) off the
ground.
2. Turn off the machine and remove the key.
3. Lift the rear of the machine (Fig. 0001).
4. Position jackstands under the rear 2 corners of the
machine. Remove the floor jack (Fig. 0002).
Toro Wheeled CUL Service Manual
DSC-0100a
Fig. 0001
DSC-0099a
Fig. 0002
ALL UNITS/GENERAL
5. Raise the front of the machine (Fig. 0003).
6. Position jackstands under the front 2 corners of the
machine. Remove the floor jack (Fig. 0004).
7. Lower the loader arm.
DSC-0105a
Fig. 0003
DSC-0107a
Fig. 0004
3/1-1