Test Mode; General Information; Test Mode Specifi Cation - Kenwood DDX6034 Service Manual

DDX6034/6034M/6054/7034BT/7034BTM/714
DNX7000EX/7140/7240BT/7340BT

1. General information

1.1. Purpose
This document is prepared to clarify necessary information
on the Test mode used at the production processes and at
the service bases regarding the products of 09Visual Prod-
uct.
Class
K
E
K
DNX
K2
E
M / M2 / X / V
K
E
Q
R / M / M2 / X / V
DDX
K
R / M / M2 / X / V
Q
M / M2 / X / V
1.3. Outline
This section describes the Test mode of the 09Visual Prod-
uct regarding the display specifi cations, the specifi cations
of the operation with the key remote controller, and the de-
tails of its behavior.
2. Test Mode specifi cation
2.1. Operations
The system can be transferred to the Test mode with the
following two approaches:
Regardless of the ON/OFF status of security, the system
can be transferred to the Test mode with one of the follow-
ing operations.
(1) Press the [Reset] key to start the system while pressing
the [SRC] key and the [ATT] key at the same time.
(2) Input "2 → → 3" with the remote controller (SW: AUD)
into the standby source.
14

TEST MODE

Destination Model Name
DNX9140
DNX9240BT
DNX7140
DNX7000EX
DNX7240BT
DNX7340BT
DDX914
DDX8024BT
DDX8054BT
DDX8034BT
DDX714
DDX7034BT
DDX6054
DDX6034
Table 1.2.1 Model List of 09Visual Product
1.2. Scope of application
This document is applied for the models described in Table
1.2.1. (This document also describes the presence or ab-
sence of the functions related to the Test mode.)
BT Built-in Ext SW
x2
x2
x2
x2
x2
x2
x2
x2
x2
x2
x2
x2
In the Test mode, the LED for SI fl ickers at regular intervals.
When starting in the Test mode, the illumi is turned ON in
white.
Turn the system OFF in 30 minutes when it is started in the
Test mode.
2.2. Screen transition
The system is started with the Test Mode Main screen when
it is started in the Test mode. When the system is trans-
ferred to the Test mode using the remote controller, it trans-
fers to the Test Mode Main screen.
A variety of screens that can be transferred from the Test
Mode Main screen is shown in Figure 2.2.
Refer to Section 2.3 for the functions in each screen.
DSP
5.1ch
5.1ch
Simplifi ed
Simplifi ed
Simplifi ed
Simplifi ed
5.1ch
5.1ch
5.1ch
5.1ch
Simplifi ed
Simplifi ed