Toro Riding Mower Safety - Toro Reelmaster 4000-D 03706 Operator's Manual

Traction unit

Hide thumbs

Table Of Contents

Table of Contents

• Stop the engine and disengage drive to attachment

– before refuelling;

– before removing the grass catcher/catchers;

– before making height adjustment unless adjustment

can be made from the operator's position.

– before clearing blockages;

– before checking, cleaning or working on the mower;

– after striking a foreign object or if an abnormal

vibration occurs. Inspect the mower for damage and

make repairs before restarting and operating the

equipment.

• Reduce the throttle setting during engine run-out and, if

the engine is provided with a shut-off valve, turn the

fuel off at the conclusion of mowing.

• Keep hands and feet away from the cutting units.

• Look behind and down before backing up to be sure of

a clear path.

• Slow down and use caution when making turns and

crossing roads and sidewalks. Stop cylinders/reels if not

mowing.

• Do not operate the mower under the influence of

alcohol or drugs

• Use care when loading or unloading the machine into a

trailer or truck

• Use care when approaching blind corners, shrubs, trees,

or other objects that may obscure vision.

• This machine is not designed or equipped for on–road

use and is a "slow–moving vehicle." If you must cross

or travel on a public road, you should be aware of and

comply with local regulations, such as required lights,

slow moving vehicle signs, and reflectors.

Warning

Engine exhaust contains carbon monoxide, which

is an odorless, deadly poison that can kill you.

Do not run engine indoors or in an enclosed area.

Maintenance and Storage

• Keep all nuts, bolts and screws tight to be sure the

equipment is in safe working condition.

• Never store the equipment with fuel in the tank inside a

building where fumes may reach an open flame or

spark.

• Allow the engine to cool before storing in any

enclosure.

• To reduce the fire hazard, keep the engine,

silencer/muffler, battery compartment and fuel storage

area free of grass, leaves, or excessive grease.

• Check the grass catcher frequently for wear or

deterioration.

• Keep all parts in good working condition and all

hardware and hydraulic fittings tightened. Replace all

worn or damaged parts and decals.

• If the fuel tank has to be drained, do this outdoors.

• Be careful during adjustment of the machine to prevent

entrapment of the fingers between moving blades and

fixed parts of the machine.

• On multi-cylinder/multi-reel machines, take care as

rotating one cylinder/reel can cause other

cylinders/reels to rotate.

• Disengage drives, lower the cutting units, set parking

brake, stop engine and remove key and disconnect spark

plug wire. Wait for all movement to stop before

adjusting, cleaning or repairing.

• Clean grass and debris from cutting units, drives,

silencers/mufflers, and engine to help prevent fires.

Clean up oil or fuel spillage.

• Use jack stands to support components when required.

• Carefully release pressure from components with stored

energy.

• Disconnect battery and remove spark plug wire before

making any repairs. Disconnect the negative terminal

first and the positive last. Reconnect positive first and

negative last.

• Use care when checking the cylinders/reels. Wear

gloves and use caution when servicing them.

• Keep hands and feet away from moving parts. If

possible, do not make adjustments with the engine

running.

• Charge batteries in an open well ventilated area, away

from spark and flames. Unplug charger before

connecting or disconnecting from battery. Wear

protective clothing and use insulated tools.