Cabinet (G) Block Assembly, Etc - Sony Handycam DCR-PC115 Service Manual

2-11.CABINET (G) BLOCK ASSEMBLY, ETC.

The +P2 (0-No.) screws (M1.7 × 2.5) are MEC-processed. If the screws that are once removed,
Note:
are re-used, the screws may be loosened.
When re-assembling the mechanism, use the new +P2 (0-No.) screws (M1.7 × 2.5).
7 Cabinet (G) assembly,
Control switch block
(FK-1850)
6 Claw
Two screws
4
(M1.7 × 2.5),
lock ace, p2
Routing of the flexible board of the
Operation Control switch block (FK-1850)
when attaching the G frame assembly,
Cabinet (rear) assembly.
2 Sheet (L)
Two screws
5
(M1.7 × 2.5),
lock ace, p2
Battery lock,
1
Compression spring
Two screws
3
(M1.7 × 2.5),
0-No, +p2
(Note)
6 Cabinet (L),
2
DCR-PC115/PC115E/PC120BT/PC120E
3 Cabinet (G)
assembly
Control switch block
(FK-1850)
Screw
(M1.7 × 2.5),
lock ace, p2
2-11
1 Jack
cover (G)
4 Control switch block
(FK-1850)
2 Four precision
screws
(dia, 1.7 × 4)
Screw
1
(M1.7 × 2.5),
lock ace, p2
4 Control switch block
(PS-1850) (15P)
5 G frame assembly,
Cabinet (rear) assembly,
Control switch block (PS-1850),
KY-060 board
Two screws
3
(M1.7 × 2.5),
lock ace, p2