Modification Of E, F, 7 Page Data - Sony Handycam DCR-PC115 Service Manual

1-2-3. INITIALIZATION OF E, F, 7 PAGE DATA
1. Initializing the E, F, 7 Page Data
Note1: If "Initializing the E, F, 7 Page Data" is performed, all data of the
E page, F page and 7 page will be initialized. (It is impossible to
initialize a single page.)
Note2: If the E, F, 7 page data has been initialized, following adjustments
need to be performed again.

1) Modification of E, F, 7 page data

2) Camera system adjustments
Adjusting page F
Adjusting Address 10 to FF
Adjusting page E
Adjusting Address 00 to FF
Adjusting page 7
Adjusting Address 00 to FB
Switch setting:
POWER .................................................................. CAMERA
Initializing Method:
Order Page Address Data
1 0 01 01
2 6 01
3 6 03 01
4 6 02
5
2. Modification of E, F, 7 Page Data
If the E, F, 7 page data has been initialized, change the data of the
"Fixed data-2" address shown in the following table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the camcorder may
not operate.
3) When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of E, F, 7 Page data
1) Select page: 0, address: 01, and set data: 00.
2) Turn off the power and turn on again.
Procedure
Set the data.
Set the following data, and press
PAUSE button.
2D: DCR-PC115/PC120BT (NTSC)
2F: DCR-PC115E/PC120E (PAL)
Set the data, and press PAUSE
button.
Check that the data changes to "01".
Perform "Modification of E, F, 7
Page Data".
DCR-PC115/PC115E/PC120BT/PC120E
3. F Page Table
Note1: Fixed data-1: Initialized data. (Refer to "1. Initializing the E, F, 7
Page Data".)
Fixed data-2: Modified data. (Refer to "2. Modification of E, F, 7
Page Data".)
Initial value
Address
NTSC PAL
00 to 0F
10 to 11
12 40 40
13 to 14
15 81 81
16 B0 B0
17 17 17
18 70 70
19 50 50
1A 8D 8D
1B C8 E8
1C 80 80
1D 7A 7A
1E 00 00
1F 00 00
20 to 22
23 80 80
24 to 27
28 78 78
29 3B 3B
2A 33 33
2B 3C 3C
2C 96 96
2D 6D 6D
2E 27 27
2F 65 65
30
31 2C 2C
32
33 2D 2D
34 to 36
37 02 02
38 E5 E5
39 to 3F
40 84 84
41 4A 4A
42 AD AD
43 47 47
44 F0 F0
45 21 21
46 80 80
47 80 80
48 40 40
49 C0 C0
4A 40 40
4B C0 C0
4C 40 40
4D C0 C0
4E 40 40
4F C0 C0
5-13
Remark
Fixed data-1
40.5MHz/54MHz origin osc adj.
Fixed data-1
HALL adj.
MAX GAIN adj.
AWB & LV standard data input
CCD output 2ch matching adj.
Fixed data-1
CCD output 2ch matching adj.
Fixed data-1
AWB & LV standard data input
Auto white balance adj.
Strobe white balance adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Color reproduction adj.
Fixed data-1
Flange back adj.
MR adj.