Siemens OZS164 SERIES WEB SERVER Commissioning Instructions page 63

Supported data
Siemens
Building Technologies
The following data points can be operated depending on connected bus device and
configuration.
Data point text in SMS
OptgMode_HC1
OptgMode_HC2
OptgMode_HC3
DHW_OptgMode
RoomTemp_ComfSetp_HC1
RoomTemp_ComfSetp_HC2
RoomTemp_ComfSetp_HC3
DHW_NomSetp
RmTmp_act_val_HC1
RmTmp_act_val_HC2
RmTmp_act_val_HC3
DHW_TempActTop_B3/BMU
Outside_temp
Error_signal
Maintenance_message
Reset_HP
• The available values of the connected bus device can be checked up in the
menu "Home > bus device > SMS" of the web operation.
• Text messages (data point texts and entry values) are written in the language
set on the web server (see menu "Home > 0.5 OZS164.23 > Settings > SMS
operation").
• When entering text messages, spaces in the data point texts must be replaced
with an underscore "_".
Example: The data point text "DHW TempActTop B3/BMU" from the "SMS"
menu must be entered in the text message as "DHW_TempActTop_B3/BMU".
• Texts are displayed in the "SMS" menu for the bus device in the language of the
logged on user (see "User accounts" in primary navigation). The user language
must be adapted to the web server language to get to the currently active data
point texts for the web server.
Web server
SMS operation
Description
Operating mode heat circuit 1
Operating mode heat circuit 2
Operating mode HC3/P
DHW operating mode
Room temperature Comfort setpoint HC1
Room temperature Comfort setpoint HC2
Room temperature Comfort setpoint HC3/P
DHW temperature nominal setpoint
Room temp actual value heat circuit 1
Room temp actual value heat circuit 2
Room temperature actual value HC3/P
DHW temperature actual value top (B3)
Outside temp
Error signal
Maintenance message
Reset heat pump
Input values
Protection, Automatic,
Reduced, Comfort
Protection, Automatic,
Reduced, Comfort
Protection, Automatic,
Reduced, Comfort
Off, On
e.g. 20.0 C
e.g. 20.0 C
e.g. 20.0 C
e.g. 60.0 C
No, Yes
63 / 108
CE1C5711en
25.08.2010