Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual page 62

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
Procedure
Step 1 Remove a 16-mm (0.63 in.) long section of the jacket, as shown in
When you remove the shield layer, do not damage the insulation of the twisted-pair cable.
Figure 5-29 Removing the jacket of a twisted-pair cable (unit: mm (in.))
Step 2 Align the four pairs of wires and cut the ends neatly, as shown in
between the wires and the pins are listed in
Figure 5-30 Connections between wires and pins (unit: mm (in.))
Pin 8
Table 5-6 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
Issue 11 (2015-05-18)
NOTICE
Pin 1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-6.
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Figure 5-29.
Figure 5-30. The connections
C
16
5 Appendix
55