Samsung np-q1ex User Manual page 193

If the network does not provide DHCP,
you have to specify the correct IP
address by asking your network
administrator.
Even if the network provides DHCP,
the server may not allocate an IP
address to the client properly, and the
client station cannot connect to the
network.
Q
I cannot connect to the AP.
 Check the Computer Settings
A1 Select Start > All Programs >
Accessories > Windows Mobile
Center and check the wireless device
status.
 W hen the Wireless is turned off
If the Wireless LAN LED is inactivated
with gray color, press the Wheel
button to run the MENU program and
set Wireless LAN to On.
 W hen it is represented as
Disconnected
This means the computer is not
connected to the AP. Check the status
of the AP, referring to the descriptions
of the Checking the SP Settings
section below. Check the encryption
key configured in the AP and retry to
the connection.
 When it is represented as
Connected, but you cannot
connect to the Internet
This means the computer is
connected to the AP, but the AP or
external network connected with the
AP may have a problem.
 W hen the 'There is no wireless
LAN adapter' message appears or
there is no wireless LAN icon
This means the wireless LAN device
is set to Do Not Use or the device is
not recognized.
Check if the wireless device is
properly recognized in the Device
Manager window. If the device is set
to Do Not Use, right-click and select
Use from the pop-up menu.
A2 Verify whether the same network key
(encryption key) has been entered
for both the AP and the computer.
The network key is an encryption key
for encrypting the data transmitted
between the AP and the computer. It
is recommended setting the network
key manually.
19