Registering Portable Stations - Panasonic KX-NCP0158 Quick Installation Manual

10 Registering Portable Stations

10 Registering Portable Stations
Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required.
A Proprietary Telephone (PT) with multiline display (e.g., KX-T7636 6-line display) is required to perform the
PBX system programming.
Note
For details about system programming using a PT, refer to "PT Programming" in the Feature Guide,
and "PT Programming" in the PT Programming Manual.
Entering the PBX System Programming Mode Using a PT
Administrator Level
PROGRAM/
PAUSE
Note
means default value.
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
CAUTION
To avoid unauthorised access and possible abuse of the PBX, we strongly recommend:
a.
Keeping the password (PIN for PS registration) secret.
b.
Not using the default password and changing the password regularly.
c.
Selecting a complex, random password that cannot be easily guessed.
Note
The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during normal
operation after registration, even if there is more than 1 PBX with the same PIN near the PS, the PS will
not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
ENTER
Setting the PIN for PS
52 Quick Installation Guide
System Password for Administrator—
#
for PT Programming
PIN for PS Registration
4 digits
1234
= 1234
ENTER
Programming No.
3 digits
END
(HOLD)