Panasonic KX-NCP0158 Quick Installation Manual page 48

8 Registering IP Cell Stations
Note
Please wait about one minute after clicking Apply to allow changes to take effect.
5.
Click Command to return the status of the port to "INS".
De-registering the IP-CS
When uninstalling an IP-CS that has been installed once, de-register the IP-CS.
Note
When uninstalling IP-CSs that are supplying the clock signal, air synchronisation is lost. If there is an IP-CS
that is synchronised with the IP-CS that is being uninstalled, reconstruct the air synchronisation tree
beforehand so that the uninstalled IP-CS is not supplying the clock signal to any IP-CSs.
1. a.
Under Configuration, click Slot.
b.
For the KX-NCP500/KX-NCP1000, move the
mouse pointer over the PBX image of IPCMPR
Virtual Slot at the top of the screen, and click
Select Shelf. For the KX-TDE600, move the
mouse pointer over the white PBX image of
IPCEMPR Virtual Slot at the bottom of the screen,
and click Select Shelf. Move the mouse pointer
over the V-IPCS4 card. A menu will be shown
under the mouse pointer.
c.
Click Port Property.
2. Click De-registration.
A dialogue box will appear. Registered IP-CSs are
displayed on the left.
3. a.
Highlight IP-CSs and click the right arrow to select
them for de-registration.
b.
Click Next.
A dialogue box will appear.
c.
Click Confirm.
If the de-registration is successful, the dialogue box
will show "De-registration succeed".
d.
Click Close.
Once the IP-CS is successfully de-registered, the status of the IP-CS will update to show "None".
Forced De-registering the IP-CS
Follow the steps below to forcibly de-register an IP-CS when normal de-registration was unsuccessful.
48 Quick Installation Guide