Infra-red port
Problem
The infra-red feature does not
work
Erroneous data is transmitted
and/or received
Possible solutions
Make sure the IR Monitor in the Windows Control Panel is configured
correctly.
Make sure the IR port is configured correctly in the Advanced menu in
Setup.
Make sure the correct IrDA driver software is installed.
Make sure that the IrDA transmitter is clean.
Make sure that there are no obstructions between the two devices, and
that the two devices are positioned so that they are 'visible' to each
other.
Make sure that light from a lightbulb, or sunlight is not interfering with
the signal path.
Make sure that other domestic remote controls are not interfering with
the IR signal.
OWNER'S HANDBOOK
T r o u b l e s h o o t i n g
8 / 9