Sony GRAND WEGA KF-60DX100 Operating Instruction page 34

installing and
i~c~nn~c~
all bower s feces Sefare ~ak~~l any C~i?~~~~~~~~~S
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2 Connect the CATV cable to the VCR's VHF/UHF IN jack.
3 Using a coaxial cable, connect the VCR's OUT jack to the LCD
projection TV's VHF/UHF jack.
4 Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S
VIDEO OUT jacks to the LCD projection TV's AUDIO and S VIDEO
IN jacks.
Rear of LCD projection TV
I
n
Satellite
antenna
1
Satellite receiver
cable
x
(not supplied) '
1 1 VMC-f310S'
820s (not
-.
supplied)
Fi--
e . ..m_..
5 VI"lz"
AUDIO-L (white) -
Coaxial cable
YC-15W3OV (not supplied)
@n Be sure your VCR's video input is set correctly. Consult your VCR's
operating manual for instructions.
.@I Use TV/VIDEO to select
- VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned on).
- VHF/UHF to watch cable TV.
6 If your VCR or satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.
34