Sony GRAND WEGA KF-60DX100 Operating Instruction page 13

introducing the Sony LCD Projection TV
The projection lamp has a limited life.
$-
If the screen becomes dark, the color looks unusual, or the LAMP indicator
g
on the front of the LCD projection TV flashes, it is time to replace the lamp
s
with a new one (not supplied).
2'
or death. Be sure to follow the instructions below.
Use a Sony XL-2000U replacement lamp (not supplied) for
ij
replacement. Failure to do so may damage the LCD projection TV.
7%
Do not remove the lamp for any purpose other than replacement.
s
Failure to do so may cause fire or a skin burn.
2
Before replacing the lamp, turn the power off on the main unit, then
G
several minutes later, unplug the power cord. (The cooling fan will
continue to blow for about two minutes after turning the power off.)
Before replacing the lamp, let it cool down completely, as the surface of
the lamp remains extremely hot for at least 30 minutes after the power
has been turned off.
Do not leave the removed lamp near flammable materials or within the
reach of children.
Do not pour water onto the removed lamp, or put any object inside the
lamp. Doing so may cause the lamp to burst.
Do not put flammable materials and metal objects inside the lamp
receptacle of the LCD projection TV after removing the lamp. Doing so
may cause fire or electrical shock. Also, be sure not to touch the
receptacle, because it may cause a skin burn.
Mount the new lamp securely, otherwise the screen may become dark,
or it may cause a fire.
For environmental conservation, Sony collects the used lamps. Please put the
used lamp in the lamp box and give it to your Sony dealer where you bought
the lamp.
@n Do not touch the front glass of a new lamp or the glass of the lamp
receptacle. This may reduce picture quality or lamp life.
(Continued)
13