Additional Functions; Flash - Canon HR10 Instruction Manual

Photos
You can use the built-in flash to record
still images in dark places. The flash
features the red-eye reduction function.
(1)
NOTES
• The practical range of the flash is
approx. 1 to 2 m (3.3 to 6.6 ft.). The
range depends on the recording
conditions.
• The range of the flash decreases in
continuous shooting mode.
• For red-eye reduction to be effective,
the subject needs to look at the assist
lamp. The degree of reduction depends
on the distance and on each individual.
• The flash will not fire in the following
cases:
- When you manually adjust the
exposure in
~A
(auto) or
©
(red-eye
reduction) mode.
- During auto exposure bracketing.
- In the
[II
FIREWORKS] recording
program.
• The flash mode cannot be selected
when the exposure is locked.
• We recommend not using the flash while
the optional Wide-converter is attached;
its shadow can appear on the screen.
• About the AF-Assist Lamp: While you press
[PHOTO]
halfway, if the subject is too
1
If the joystick guide does not
appear on screen, press (@) to
display it.
2
Push the joystick (.... ) toward
~.
• If
~
does not appear on the
joystick guide, repeatedly push the
joystick
CY)
toward [NEXT] to
display it.
• Repeatedly push the joystick ( .... )
toward
~
to cycle between the
flash modes.
• The display
~A
disappears after 4
seconds.
3
Press
[PHOTO),
first halfway to
activate the autofocus and then
fully to record the still image.
(Q]
26)
• Default value
POINTS TO CHECK
Additional Functions
'·~·~··.(~~.~·~~~~·:(ed~~ti,9.Q~·:~~lPr,
The flash fires automatically according to the
brightness of the subject. The assist lamp lights
up to reduce the red-eye effect.
,
:,
.,
..
~
:"
H~::i::tfl_a~t1'oro'F
.
The fla-sh
does not fire.
Options
Flash
78
Photos
You can use the built-in flash to record
still images in dark places. The flash
features the red-eye reduction function.
(1)
NOTES
• The practical range of the flash is
approx. 1 to 2 m (3.3 to 6.6 ft.). The
range depends on the recording
conditions.
• The range of the flash decreases in
continuous shooting mode.
• For red-eye reduction to be effective,
the subject needs to look at the assist
lamp. The degree of reduction depends
on the distance and on each individual.
• The flash will not fire in the following
cases:
- When you manually adjust the
exposure in
~A
(auto) or
©
(red-eye
reduction) mode.
- During auto exposure bracketing.
- In the
[II
FIREWORKS] recording
program.
• The flash mode cannot be selected
when the exposure is locked.
• We recommend not using the flash while
the optional Wide-converter is attached;
its shadow can appear on the screen.
• About the AF-Assist Lamp: While you press
[PHOTO]
halfway, if the subject is too
1
If the joystick guide does not
appear on screen, press (@) to
display it.
2
Push the joystick (.... ) toward
~.
• If
~
does not appear on the
joystick guide, repeatedly push the
joystick
CY)
toward [NEXT] to
display it.
• Repeatedly push the joystick ( .... )
toward
~
to cycle between the
flash modes.
• The display
~A
disappears after 4
seconds.
3
Press
[PHOTO),
first halfway to
activate the autofocus and then
fully to record the still image.
(Q]
26)
• Default value
POINTS TO CHECK
Additional Functions
'·~·~··.(~~.~·~~~~·:(ed~~ti,9.Q~·:~~lPr,
The flash fires automatically according to the
brightness of the subject. The assist lamp lights
up to reduce the red-eye effect.
,
:,
.,
..
~
:"
H~::i::tfl_a~t1'oro'F
.
The fla-sh
does not fire.
Options
Flash
78