Intercept Routing - Panasonic KX-TDA50 Feature Manual

Type
No Destination
Intercept Routing redirects calls to destinations based on the original destination of the call, as shown in the
table below. Different intercept destinations can be programmed for each time mode. Note that calls
redirected by Intercept Routing—No Answer/Busy/DND are directed to the same destination, and that the
intercept destination for Intercept Routing—No Destination is always an operator.
When the original destination is:
• Wired Extension (PT/SLT/T1-OPX)
• PS
• ICD Group
• PS Ring Group
• VM Group (DTMF/DPT)
• External Pager (TAFAS)
• DISA
• Analog/ISDN Remote Maintenance
• Idle Line Access no. + Phone no.
• Trunk Group Access no. + Trunk Group no. +
Phone no.
• Floating Extension no. for SVM
• Other PBX Extension (TIE with no PBX Code)
• Other PBX Extension (TIE with PBX Code)
If a call has no destination (i.e., if a destination is not assigned), the call is
redirected to an operator. (→ 1.9.12 Intercept Routing—No Destination)
The destination assigned to the original extension.
→ 2.10.1 [4-1-1] Wired Extension—Extension
Settings—Option 1—Intercept Destination—Day,
Lunch, Break, Night
→ 2.10.10 [4-2-1] Portable Station—Extension
Settings—Main—Intercept Destination—Day, Lunch,
Break, Night
→ [604] Extension Intercept Destination
The ICD Group Overflow destination assigned to the
group. (→ 1.9.5 ICD Group Features—Overflow)
→ 2.9.9 [3-5-1] Incoming Call Distribution Group—
Group Settings—Overflow No Answer—Time out &
Manual Queue Redirection—Destination-Day, Lunch,
Break, Night
→ [625] Destination for Overflow Time Expiration
The destination assigned to the trunk group carrying
the call.
→ 2.9.1 [3-1-1] Trunk Group—TRG Settings—
Intercept—Intercept Destination—Day, Lunch, Break,
Night
→ [470] Trunk Group Intercept Destination
The destination assigned to the trunk group carrying
the call*.
→ 2.9.1 [3-1-1] Trunk Group—TRG Settings—
Intercept—Intercept Destination—Day, Lunch, Break,
Night
→ [470] Trunk Group Intercept Destination
Not assignable (Intercept Routing is not available.)
Description
The Available Intercept Destination is:
1.9 I
Feature Manual 157