Create Calibration Target - Canon iPF6400S User Manual

Hide thumbs Also See for iPF6400S:

Table of Contents

Create Calibration Target

To perform color calibration on custom paper, a calibration target needs to be created for that custom paper and

registered in the printer.

There are two types of calibration targets, calibration targets for executing color calibration Auto Adjust (High Pre-

cision) on the control panel and imagePROGRAF Color Calibration Management Console and calibration targets

for executing Auto Adjust.

The optional spectrophotometer unit is required in order to create a calibration target.

In order to create a calibration target, roll paper of width 406.4 mm (16.00 inches) or more is required.

In order to create a calibration target, you need to add the custom paper in advance. For details on the procedure for

adding custom paper, see "Add Custom Paper."

Open the Add and Edit Custom Paper dialog box.

For details on the procedure for opening the Add and Edit Custom Paper dialog box, see "Using Paper Other

than Genuine Paper and Feed Confirmed Paper."

Select the paper that you want to create the calibration target for from the Added Custom Paper list and

click the Create Calibration Target button.

If Color Calibration is Can execute, then the calibration target is already registered in the printer. If you per-

form color calibration using a recreated calibration target, the color tones may change.

If Color Calibration is Only Auto Adjust (High Precision) allowed, then the calibration target for executing

color calibration Auto Adjust (High Precision) in the control panel and imagePROGRAF Color Calibration

Management Console is already registered in the printer. A calibration target is not registered for executing

Auto Adjust.

If Color Calibration is Cannot execute, then a calibration target cannot be created for this custom paper.

Load the custom paper into the printer and click the

Execute button in Create Calibration Target.

User's Guide

Create Calibration Target