Maintenance Menu - Sony PMW-F55 Operating Instructions Manual

Maintenance Menu

Maintenance
Menu items Sub items and setting values Contents
APR APR
Executing APR
Test Saw Setting
Setting the test
signal output
Camera Config RM Common Memory
Detail settings for
the camera
HD/2K Modulation
90 Setup Menu List
Execute / Cancel
On / Off
On / Off
High / Low
Executes APR (Auto Pixel Restoration: auto adjusting of the
image sensor).
Turns the test signal on/off.
Sets whether to share the settings of when connecting the
remote control unit and using the camcorder alone.
Note
This item cannot be selected when connecting the remote
control unit.
Sets the video resolution of the HD/2K signal that is
converted from the 4K/QFHD signal.
High: High resolution that focuses details
Low: Resolution equivalent to a conventional HD camera
(such as F35, PMW-F3, etc.)
Note
This setting is for the HD/2K recording signal or HD/2K output
signal when shooting while "Imager Scan Mode" is set to
"Normal," or the HD/2K output signal when playing the clip of
XAVC 4096 × 2160/XAVC 3840 × 2160 or AXS memory (this
setting is also applied to the viewfinder output signal).