Sony PMW-F55 Operating Instructions Manual page 76

Audio
Menu items Sub items and setting values Contents
Reference Out
(Only when the CBK-55BK is
attached)
WRR Setting
WRR Valid CH Sel
Setting related to
the wireless
receiver
(Only when the
CBK-55BK is
WRR CH Select
attached)
WRR Delay Comp
TX
TX Audio Peak
TX Input Level
TX ATT Level
TX LCF Frequency
TX System Delay
76 Setup Menu List
+4dB / 0dB / –3dB / EBUL
All / CH1
TX1 / TX2
On / Off
--- / Peak
--- / Mic / Line
Auto / 0.0ms to 8.0ms
Sets the output level for the reference input level of the LIVE
AUDIO OUT connector on the CBK-55BK.
Selects whether to enable channels 1 and 2 of the wireless
receiver ("All") or channel 1 only ("CH1").
All: Enables channels 1 and 2.
CH1: Enables channel 1 only. (Select when using as the
monaural wireless receiver.)
Specifies the target channel for menu display.
TX1: Displays channel 1.
TX2: Displays channel 2.
Enables delay compensation for wireless audio input.
Off: Disables.
On: Enables. (The audio in all E-E output is delayed by about
8 ms.)
Displays the name of the transmitter of which signals are
being received on the channel selected by "WRR CH Select."
Displays whether the AF level of the transmitter of which
signals are being received on the channel selected by "WRR
CH Select" are peaking.
Displays whether the input level of the transmitter of which
signals are being received on the channel selected by "WRR
CH Select" is set to MIC or LINE.
Sets the ATT level of the transmitter of which signals are
being received on the channel selected by "WRR CH Select."
(The setting range varies depending on the transmitter.)
Sets the low cut filter frequency of the transmitter of which
signals are being received on the channel selected by "WRR
CH Select." (The setting range varies depending on the
transmitter.)
Specifies the amount of audio delay for the channel selected
by "WRR CH Select."
Auto: Automatically adjusts the amount of delay so that the
delay in the audio received from the wireless transmitter is
zero.
0.0ms to 8.0ms: Sets the amount of anticipated wireless
system delay, for cases in which several wireless systems are
being used over a devices such as an audio mixer.