Configuring Track Arming Groups - Yamaha DM 2000 Owner's Manual

TARGET TRACK: This parameter is used to specify the Master machine track that is to be
armed when each TRACK ARMING button is pressed.
Configuring Track Arming Groups
Track arming groups A, B, C, and D provide a quick way to arm multiple MTR or Master
machine tracks.
Use the TRACK ARMING [DISPLAY] button to locate the Track Arming Group
1
page.
2 Use the cursor buttons or Parameter wheel to select the track buttons, and
use the INC/DEC buttons or [ENTER] button to add and remove tracks from
the groups.
A track is in a group when its button appears highlighted, and tracks can be in multiple
groups. The CLEAR buttons can be used to clear all assignments in each group.
When a TRACK ARMING GROUP [A–D] button is pressed, that button's indicator, and
the button indicators of the tracks in that group light up. If one of those tracks is subse-
quently unarmed, or another track is armed, the TRACK ARMING GROUP [A–D] button
indicator goes out.

Configuring Track Arming Groups

DM2000—Owner's Manual
227