Scrolling Windows; Selecting Channels; Assigning Inputs To Channels - Yamaha DM 2000 Owner's Manual

Scrolling Windows

The following shortcuts can be used to scroll the Mix and Edit windows.
Scroll window to the left
Scroll window to the right
Scroll window up
Scroll window down
Scroll window to the beginning
Scroll window to the end
Scroll window to the top
Scroll window to the bottom

Selecting Channels

Channels can be selected as follows.
(Make sure the ENCODER MODE [ASSIGN 4] (INSERT) button indicator is not lit before
proceeding.)
1 Use the [SEL] buttons to select channels.
The [SEL] button indicators of selected channels light up. The border of the corresponding
channel strip displays also light up.
To select multiple channels in each eight-channel block (e.g., 1–8, 9–16, or
2
17–24), while holding down one [SEL] button, use the [SEL] buttons of the
other channels in the same block to add and remove channels.
The following shortcuts apply.
To do this...
Select multiple channels
Select all channels
Inverse the channel selection

Assigning Inputs to Channels

Channels can be assigned to input sources as follows. The Pro Tools transport must be
stopped in order to make these assignments.
You can view the current input source assignment for each channel on the channel strip dis-
plays by pressing and holding the ENCODER MODE [ASSIGN 1] (INPUT) button.
1 Press the ENCODER MODE [ASSIGN 3] (SEND ASSIGN) button.
Its button indicator flashes, and the SELECT ASSIGN section of the display shows "ASGN."
2 Press the ENCODER MODE [ASSIGN 1] (INPUT) button.
Its button indicator lights up, and the channel strip displays show the current input source
for each channel.
Use the Encoders to select input sources.
3
The names of the input sources appear on the channel strip displays in abbreviated form.
When you select a source other than the current, the ring of the corresponding channel strip
display flashes.
To confirm your selection, press the Encoder's push-switch.
4
The channel strip display ring stops flashing.
Scrolling Windows
USER DEFINED KEYS [13]+Left cursor button
USER DEFINED KEYS [13]+Right cursor button
USER DEFINED KEYS [13]+Up cursor button
USER DEFINED KEYS [13]+Down cursor button
USER DEFINED KEYS [5]+USER DEFINED KEYS [13]+Left cur-
sor button
USER DEFINED KEYS [5]+USER DEFINED KEYS [13]+Right
cursor button
USER DEFINED KEYS [5]+USER DEFINED KEYS [13]+Up cur-
sor button
USER DEFINED KEYS [5]+USER DEFINED KEYS [13]+Down
cursor button
Do this!
USER DEFINED KEYS [4]+[SEL]
USER DEFINED KEYS [5]+[SEL]
USER DEFINED KEYS [13]+[SEL]
203
DM2000—Owner's Manual