Adjust The Pir Sensor - Siemens RF30-EM Configuration Manual

Mounting
10.4

Adjust the PIR sensor

20
Siemens AG
Depending on the environment it could be necessary to adjust the PIR sensor.
Remember to do this carefully and keep the sensor while the screw is adjusted.
Fig. 4 RF30-EM – PIR sensor and screw to adjust the PIR sensor
Minimize the PIR sensor radius
The door is located in a busy environment for example stores or corridors.
1. Turn the screw anticlockwise.
 The sensor moves down.
Extend the PIR sensor radius
The door will be opened from the side instead of the front.
1. Turn the screw to the right.
 The sensor moves up.
04.2010