Procedure Steps
1
Lift the access door.
Figure 1-3 Installing SIM Card
2
Insert SIM card into the SIM holder with the contacts facing down and the cut edge facing away from the holder.
Close the access door.
3
1.3.2 Installing the Battery
Ensure that the correct battery is used with the ET1. On the ET1N0 use either the 4620 mAh battery,
p/n 82-149690-xx or the 5640 mAh battery, p/n 82-158261-xx. On the ET1N2 use only the 5640 mAh
battery, p/n 82-158261-xx.
To install the battery:
MN000022A01 - May 2013
1.3.2 Installing the Battery
1-5